Design Of Ear Like Shoes

The inner ear type and the outer ear type structural change are arranged on the female shallow shoe, which forms the variant design of the ear like shoes.

Shoes or ears need to be tied or laced. The main function of these shoelaces or shoe buckles is decoration, rather than opening and closing functions.

1. design of female inner ear shoes

The inner ear shoe is characterized by the front shoe pressing shoes, so we must first design the front shoe contour and then design the shoe ears.

Because the shoe ears of women's shallow shoes are located near the front control line, the location of the shoe door must be selected before Vo.

The distance between the door and the V point is not the key. It is important to design the location of the shoe ears near the front control line. The overall shape still belongs to the female shallow shoe. See figure 3-3-4.

After designing the round shoe, design the shoe ears near the VO line.

The front contour of the shoe ear is connected with the mouth door, and the rear contour line is connected to the Q. point, according to the design rule of the shallow shoe, the difference between the inside and outside shoe bosom is reflected on the shoe and the back.

The design position of the tongue is a broken tongue.

The rest is designed with round shoes.

The rear package can also solve the problem of opening.

When the front line is close to the waist socket position, it can be taken out of the Huai craft Qiao.

2. the design of the shoes with female outer ears.

The characteristics of outer ear shoes are the front pressure of shoes and ears, so the outline of shoe helix should be designed first.

Similarly, the shoe ears are designed near the VoO line, and the whole back contour line is continuously connected. Then, the position of the front Gang is found through the relationship between stubble, and the width of the mouth position is determined from the position of the front lOmm from the front end of the shoe ear, and the whole shoe tongue is designed, as shown in Fig. 3-3-5.

After the shoe, there is a difference between the inside and outside, assuming that the inside is broken to help craft.

The rest is designed with round shoes.