Technical Requirements For Cutting Of Woven Garments

Before drawing, it is necessary to draw out the layout chart according to the template. "Complete, reasonable and economical" is the basic principle of discharging.

The main process requirements in the cutting process are as follows:

(1) clear the quantity when dragging material and avoid defects.

(2) for different batches of dyed or washed fabrics, they should be cut in batches to prevent chromatic aberration on the same garment.

Chromatic aberration should be used in a fabric with chromatic aberration.

(3) when discharging, pay attention to the straight thread of the fabric and whether the direction of the silk thread of the garment is in accordance with the technological requirements, and the fabric of velvet (such as velvet, velvet, corduroy, etc.) must not be discharged in reverse direction, otherwise the color of the garment will be affected.

(4) for the fabric with stripes, we should pay attention to the alignment and positioning of the stripes in each layer, so as to ensure the continuity and symmetry of the stripes.

(5) cutting requires accurate knives and smooth lines.

The overlay shall not be too thick, and the upper and lower layers of the fabric shall not deviate from the knife.

(6) cut the knife edge according to the pattern mark.

(7) attention should be paid to the appearance of garments when using cone hole marking.

After the tailoring, the quantity and the inspection work shall be counted, and according to the size of the garments, it shall be divided into heaps and bundled.